One originates under the fibers of the carpet, in the backing or pad of the carpet. The other originates from the carpet's own fibers. The stains that come to the surface as a result of absorption originate underneath the carpet fibers. Stains that re-emerge due to moisture absorption start below from the carpet itself.
If you've just cleaned a stain or have asked a professional to remove the stain, but then you've returned it after the carpet has dried, the reason is that it absorbs moisture. To give an example of how moisture absorption occurs, let's say you spill a cup of coffee or maybe you find a family pet that accidentally pees on the carpet and you immediately pick up your favorite cleaner and a rag and the stain comes off right away. That seems to be the end, right? Not necessarily. Often, what happens is that the liquid makes its way past the fiber of the carpet, reaches the back of the carpet and, often, even reaches the cushion itself. The stain is now trapped under the surface of the carpet and can be very difficult to remove.
When you clean the carpet fibers, the stain that is trapped underneath will continue to crawl through the carpet over and over again. The other cause of recurring stains is called absorption. What this means is that the original stain has penetrated the fibers of the carpet to the support underneath, and perhaps even to the padding that is under the carpet. This happens with large amounts of liquid and emphasizes the importance of erasing a stain as quickly as possible before it gets soaked.
The reality is that you are not alone. The reappearance of stains is common when cleaning a carpet with a traditional method: soaps, shampoos and a basic rinse. The water will evaporate, but the stain will remain. When stains return as soon as the carpet dries, it's because they absorb moisture.
Skilled carpet installers can lift the carpet without damaging it, repair the padding and subfloor, and reposition the original carpet so you don't have to completely rearrange the room. The stain from the carpet is removed quite easily, but the residue left behind by store-bought cleaners or detergents will attract dirt due to their sticky nature. In any case, it can be very irritating to see stains reappear on a carpet that you have just cleaned yourself or that you have had it cleaned by a professional. Rapid soiling is the result of using an over-the-counter carpet cleaning product or a soapy detergent that has left a residue that is not easily removed by rinsing.
of the carpet. A small amount of debris remains attached to the carpet fibers and attracts dirt, making it look like the stain has returned. Like the store-bought cleaner analogy, there are some carpet cleaning companies that only care about cleaning the carpet, not how long it will stay clean. Cleaning carpets and debris that spills onto a carpet is not difficult, it's just important to know how to do it properly so that stains don't reappear and the carpet stays clean and odor-free.
When cleaning stains, use a carabiner that leaves no residue and does not contain detergent as soon as the stain appears. Second, make sure they have the right type of carpet cleaning equipment that will thoroughly rinse the carpet after removing stains from the carpet. The reappearance of stains and stains is common when cleaning a carpet with a traditional method: soaps, shampoos and a basic rinse. It was at the 1982 Harrogate Flooring Show that EN Carpets, of Danish origin, launched a small selection of tufted rugs to the UK market.
After cleaning a stain or stain from the carpet, there are times when it returns soon after the carpet is dry. Absorption occurs when a stain is so deep that it has penetrated the fibers of the carpet to reach the back of the carpet.
